Usb Ports On Imac Not Working

1. My Usb Ports Are Not Working
2. Usb Ports Stopped Working
3. Usb 3.0 Not Working Properly
4. Reset Mac Usb Ports

Before we get into the software fixes, let's start with the simplest solution of all: restarting your Mac. Switch the Mac off and back on again. You'll be surprised at how many problems a quick restart solves.

Next, check the USB device. There's a chance that it could have failed, particularly so if you're using a cheaper cable. Inspect the device visually, looking for damage to the connector and any signs of frayed wiring. If there is no apparent damage, take two different USB devices and test them against different ports. If the devices aren't working on one or all of the ports it's more likely to be an issue with your Mac and not the device.

A USB device that works on one port but not another is a sign of a faulty port. If this is the case, the only real solution is to contact an authorized Mac specialist for a hardware diagnostics test and have the port repaired.

The MacBook Pro USB Ports Aren't Working. When you're trying to scan contracts, print business plans and perform other business-related tasks on your MacBook Pro, it's essential that USB ports properly function - if they're not working, it can get you off schedule, causing lost time and productivity. Check the Hardware. Before you delve into the software labyrinth to find the solution, check the.

If the device doesn't work in any of your ports, then continue reading for some potential fixes.

What to do if Mac USB devices are not working

All of your Mac or MacBook USBs not working is actually better news than one failing. It's unlikely that all of your ports would fail at once which means the fix is probably an easy one.

Here are three things to try, starting with the most common fix.

1. Reset the SMC

Resetting the SMC (System Management Controller) is a simple fix that cures a wide range of hardware issues. How this is done depends on whether you're using a MacBook or Mac desktop.

Resetting the SMC on a MacBook Mini browser open.

1. Shutdown your MacBook.
2. Connect the power adapter.
3. Hold Shift+Control+Option and the Power button at the same time.
4. Release all the keys at the same time.
5. Let your MacBook boot up as usual and the SMC will be reset.

Resetting the SMC on an iMac, Mac mini, or Mac Pro

1. Shut down your Mac.
2. Disconnect the power cord.
3. Press and hold the Power button for 5 seconds and release.
4. Reconnect the power cord and switch the Mac back on.

2. Check for updates

Outdated firmware and software results in various hardware issues, including.. Yep — Mac USB ports not working.

Check for system updates by opening the App Store and clicking on the Updates tab. If updates are available, click on the Update button next to each application that you want to install.

3. Reset PRAM/NVRAM

The PRAM (Parameter RAM) and NVRAM (Non-Volatile RAM) hold information about various USB components. Resetting them could be the solution to your USB woes.

It's a slightly different process to resetting the SMC, but no less difficult.

1. Shutdown your Mac.
2. Restart it, holding down Command+Option (ALT)+P+R as you do.
3. Hold down the keys until you hear a sound and see the screen flash.
4. Listen for the chime sound and let the Mac boot up as usual.

4. Uninstall potentially conflicting apps

If the USB ports not working on your MacBook Pro or iMac is a recent issue and there doesn't seem to be any problem with USB devices, it could be that an app is conflicting with USB functionality. If you've downloaded an app from an unknown source there is the potential for it to contain malware, which could also be the cause of the problem.

In any case, it's worth uninstalling recently downloaded and installed apps. If they aren't the reason for the USB ports acting up, you can easily reinstall them from the App Store.

One way to remove apps is to use Launchpad or Finder. Or you can use a quicker, more effective method: CleanMyMac X.

To completely remove an app and every file associated with that app, use CleanMyMac.

CleanMyMac's Uninstaller tool scans your entire system for every trace of an app and completely removes it. Using the tool is every bit as easy as deleting an app manually.

1. Download and launch CleanMyMac (free download).
2. Click on Uninstaller from the sidebar menu.
3. Select the app that you want to remove from the list.
4. Click Complete Removal in the Smart Selector panel.
5. Hit Uninstall.

While CleanMyMac lets you uninstall apps in bulk, in this case, you should delete apps one at a time until you find the culprit. CleanMyMac also lets you clean up unwanted junk, declutter your Mac and improve performance.

One way to uninstall apps manually is by using the Launchpad:

1. Open the Launchpad.
2. Find the app that you want to remove and click and hold the icon until it starts to jiggle.
3. Click on the X that appears in the corner of the app, then click Delete.

You can also uninstall apps from the Finder:

1. Open the Finder and go to Applications.
2. Find the app that you want to remove and drag its icon to the Trash (you might need to enter your admin credentials to confirm you want to delete the app).
3. Click on the Trash icon and select Empty Trash.

Having one or more USB ports not working on your Mac can be hugely frustrating, especially if you rely on those ports for data backup and external peripherals. That said, USB problems are quite rare and are usually easy to fix. Work your way through these troubleshooting tips until you find the one that works and restore your Mac to its full glory.

Does your Mac not recognize a USB drive? What is chrome plus. Is the USB flash drive not showing up on Mac after inserting it in the USB port? Find solutions here. Download EaseUS Data Recovery Wizard for Mac when you want to recover data from a USB drive not recognized.

Mac Won't Recognize USB, What Should You Do?

Commonly, when you insert a USB drive in the USB port on a Mac computer, the drive will soon appear on the desktop or hide in the Finder, letting you access, view, and manage data on it. Did you come across the situation that no matter how many times you try to connect the USB drive with a Mac computer, the USB drive is not showing up anywhere? Why this time Mac won't recognize a connected USB you may wonder. Though not a usual thing, the issue of an external hard drive or flash drive not showing up on Mac happens sometimes. What should you do in this circumstance? What are the effective solutions to make your USB drive show up again?

This page basically covers all the possible fixes for USB not showing up on Mac, which also applies to the similar issues of other storage devices like an external hard drive not showing up on Mac, flash drive not showing up on Mac, SD card not showing up on Mac, etc. Take a quick glance at the main content and directly jump to the part you're most interested in.

10 Fixes for USB Not Showing Up on Mac

The reasons behind the problem of a USB device not showing up are various, including the USB port is not working, USB drive corruption, virus infection, macOS faulty, etc. So, to figure out the effective solutions for your own case, you need to take time to have some basic check, exclude the irrelevant issues, identify the potential risk, and finally solve it!

Fix 1. Change the USB-to-Mac connection way

Have you tried to restart your Mac once or twice? Before taking further measures, don't forget the most efficient way to tackle commonplace hardware glitches that arises from time to time. If this operating system restarting fails to solve the current problem, move on to check the physical connectivity issue step by step.

Step 1. Plug the USB drive out from the not working USB port and change to the other USB port. Try all the available USB ports on your Mac.

Step 2. Did you use a USB connection cable or a USB-C adapter? If yes, take the USB drive out, and directly plug it in the USB port.

Step 3. Is there the other Mac computer available to you? If yes, try to connect the USB drive to this computer. Is it showing up normally?

Step 4. For SD card owners, the common way to connect an SD card to a Mac needs a card reader. If changing the USB ports did not work, try to change a card reader for a new round of tests.

The four steps of troubleshooting a USB drive not showing up on Mac are very basic, however, quite helpful in most cases. Each step can help us exclude the issues of a bad/loose connection, a not working USB port, a lack of power, and other superficial phenomenons.

My Usb Ports Are Not Working

Fix 2. Change settings for Mac detecting an external hard disk on the desktop

Occasionally, your Mac has already recognized the USB flash drive but not shown it on the desktop. Thus, you should go to Finder > Preferences > General and make sure the 'External disks' option is ticked. Then you'll see the USB flash drive showing up on Mac desktop.

Fix 3. Change settings for Mac recognize an external hard disk in the Finder

Finder is the other access for us to check a connected external drive on Mac. If your flash drive or external hard drive is not showing up there, go to Finder > Preferences > Sidebar, and under Locations, you need to tick the option 'External disks'. By selecting this option, we can make sure that the connected external USB hard drive or flash drive will normally show up in the Finder.

Fix 4. Check the USB drive in System Information

When you cannot find the USB drive on the desktop or in the Finder, try to look for it in the System Information section, which is usually a hidden place for average Mac users.

Step 1. Go to Applications > Utilities > System Information.

Step 2. Check if the system detects the USB drive. Click 'USB' on the left panel, and you can also check the USB flash drive information.

Fix 5. Reset USB ports on Mac to detect a USB drive

Step 1. Restart Mac computer, press the Command +Option+P+R keys until the Apple logo appears.

Step 2. Press Command+Option+Esc keys to close all applications that are not responding.

Step 3. Plug the USB which is not showing up to your Mac computer. If it doesn't show up, click Apple icon and select 'Sleep'.

Step 4. Wake up the computer after a few seconds by pressing any key.

Step 5. Shut down the Mac, unplug the power cord, reattach it after 15 seconds.

If this doesn't work, we should suspect the corruption issue at this moment. Don't give up and try to do some repair by yourself.

Fix 6. Repair USB flash drive with First Aid if it doesn't show up

Step 1. Go to Applications > Utilities > Disk Utility.

1. Step 2. Select USB flash drive on the left panel of Disk Utility, and click 'First Aid' at the top toolbar and click 'Run'. Disk Utility will repair any errors on the drive automatically.

Step 3. Select the USB drive and click 'Unmount' at the top toolbar, unplug the USB and plug it back in 10-15 seconds.

Fix 7. Check and fix errors in a not recognized USB with Terminal

Step 1. Open Terminal in Utilities, type:diskutil list and press Return.

Step 2. Find the disk number of your USB flash drive, type: diskutil info disk2 and press Return. (Replace 2 with the disk number of your USB flash drive.)

Step 3. Type: diskutil eject disk 2 and press Return.

Step 4. Type: diskutil list and press Return.When the USB disappear from the Terminal list, close the window.

Step 5. Close Terminal and open Console to inspect your drive errors.

Step 6. Click 'Errors and Faults' to check if there are any errors.

Usb Ports Stopped Working

Step 7. Reconnect your USB flash drive back to Mac, if no error shows up, your USB flash drive is safe.

Fix 8. Save data and reformat the not showing USB drive

Disk reformatting basically solves many hard drive issues, including the not showing up USB, particularly the time when you are able to see the USB icon but files are not showing. USB drive showing empty makes no sense, so you have to reformat the disk and make it usable again.

Note that reformatting will erase data. As long as the data matters, you need to follow the standard procedure to ensure zero data loss. [1] Download EaseUS Data Recovery Wizard for Mac, the professional Mac data recovery software, to perform a full USB drive data recovery. [2] Reformat the USB drive in Disk Utility.

Os x 10 13 3. To format the USB drive in Disk Utility:

Step 1. Go to Utilities and open Disk Utility.

Step 2. Select the not showing up USB flash drive in the Disk Utility sidebar.

Step 3. Click Erase on the top.

Step 4. Finish the necessary information (name, format, and scheme) to format the USB flash drive.

Fix 9. Update your macOS and firmware

Did your Mac's OS keep updating all the time? Chances are that your Mac won't recognize a USB drive, especially after a macOS update. This time, take a close look at the settings whether your Mac is up-to-date. Equally, firmware updates address a variety of hardware issues and the functionality of the USB ports could well be one of them. So, keep your software and firmware up to date will likely make the USB drive show up as normal again.

Fix 10. Send the USB drive to a repair center

Nowadays even the branded USB flash drives are not expensive. If you've tried all the suggested troubleshooting methods, the USB drive is still not showing up on Mac, you have to accept the truth that it's severely damaged and beyond your ability to repair it.

Usb 3.0 Not Working Properly

Mac won't recognize a badly damaged flash drive or external hard drive since there is no way to show it up, even temporarily, which makes the data recovery difficult. The last chance for you to rescue data is to send the broken USB drive to a specialized data recovery service center nearby, and let the professionals try their best. You need to prepare for the manual data recovery cost, which is noticeably higher than the software data recovery. Hence, always try the cost-effective plan of using EaseUS Data Recovery Wizard to scan the USB drive for the first attempt.

Reset Mac Usb Ports

Step 1. Correctly connect your USB flash drive to your Mac. Launch EaseUS Data Recovery Wizard for Mac. Start selecting the flash drive and click 'Scan' to let the software search lost files on it.

Step 2. After a quick scan and deep scan, all files will be presented in the left panel in the scan results.

Step 3. Select files you want to recover and click the 'Recover Now' button. Don't save the recoverable files to the USB drive itself in case of data overwriting.